Support

Technical support

Questions about an unusual substrate, a coating somebody else already applied, or a condition a survey has turned up.

Timing

Call before the specification is written, not after the crew arrives

The conditions that cause problems on a ceiling project are known ones, and almost all of them are cheaper to solve on paper than on site.

ProCoat will review a draft specification and say whether it names the right product for the substrate described. Ask for the current technical data sheets at the same time, because the published figures are revised as the formulations are.

What we will ask you for: photographs, the age of the ceiling, the tile manufacturer and pattern if you know them, and what has been done to the ceiling before. A survey follows if the answers warrant one.

Photographs are usually enough to start

A handful of pictures of one location will tell us whether the ceiling is a candidate for coating or needs replacing.

Draft specifications get read

Send the draft rather than the finished document. Naming the wrong product for a substrate is easy to fix before it is issued.

The answer is sometimes no

Where the tile is not a sound candidate for a coating, that is what you will be told.

Known conditions

The six things worth raising early

Previously painted tile

Often still restorable. A survey decides it rather than a photograph, and the preparation depends on what is already on the tile.

Water staining with a live source

The leak has to be fixed first. Coating over an active source buys a few months and then costs the same money twice.

Vinyl-faced tiles

A different product and a different specification section. ProVinyl, under Section 09 91 23, rather than the acoustical tile coating.

Fire rated assemblies

Where the rating has to be evidenced rather than assumed, the specification needs to cite the current tested performance and the documentation has to reach your file.

Unknown existing coatings

Where nobody can say what is already on the surface, adhesion is the first problem to solve rather than the last.

Tiles past coating

Some tiles are past coating and get replaced. Knowing that count before you commit is the difference between a budget and a surprise.

Find out what your ceiling needs

We can do a site survey to tell you whether the ProCoat solution is right for you. If replacement is truly the best solution, we will tell you that as well.

Let’s Talk