ProCoat solution

ProCoat Maintenance Products

The material that keeps a restored ceiling serviceable between recoats.

Substrates

Restored ceilings and walls

Coverage

Colors

Application

Supplied to facilities teams after handover.

  • After handover
  • Touch-up
  • Aftercare
  • Interval stretching
Aftercare

Every ceiling like this started with one stain

Severe water staining and blistering across acoustical ceiling tiles around a recessed fluorescent fixture
Damage at this scale is a restoration job. Catching the first stain is what this page is about.

A tile with a mark on it is still a sound tile. Left alone, the mark spreads, the next leak adds to it, and what began as a touch-up becomes a restoration or a tear-out.

Everything on this page is handed to a facilities team at handover, and all of it is applied from the floor. It is what keeps the first stain from becoming a ceiling like this one.

After the crew leaves

A restored ceiling is a maintained ceiling, or it is a ceiling waiting to be restored again

The argument for restoration is that it can be repeated without the cost stepping up. That argument gets stronger the longer the interval between restorations, and the interval is set by what happens in the years in between.

Ceiling maintenance is the aftercare handed to a facilities team at handover: the Acoustical Tile Restorer, the Easy Reach Spray Adapter and the Soft Sweep Broom, for the damage a building does to itself.

It is a small line on a project and the one most likely to decide whether the next restoration is in five years or in twelve.

Acoustical ceiling tile shown in a range of custom color options
Custom tint is matched and recorded, so touch-up years later still matches the ceiling.
Product data

Specification

Supplied to Facilities and maintenance teams, at handover
Covers Restored ceilings, grid, diffusers and coated walls
Includes Touch-up material and the tools to apply it
Color Matched to the tint used on your project

Dilution rates, contact times and handling are on the current technical and safety data sheets. Ask for the current sheets before writing a work plan.

What it is for

Touch-up after damage

A cart, a leak or a contractor working in the void leaves marks. Touching those up is cheaper than letting them accumulate into a reason to recoat.

Keeping the record

The tint used on your project is recorded, so touch-up years later matches rather than approximates.

Stretching the interval

Every year added between restorations is a year of budget that goes somewhere else.

Documents

The touch-up product

ProCoat Acoustical Tile Restorer (ATR)™

Most tiles that get pulled down and sent to landfills are not damaged. They have a water stain from a roof detail or a condensate line, a soot spot, or a smudge where somebody reached into the void. The tile is fine. The mark is the problem.

The Acoustical Tile Restorer is a one-step product, primer and top coat together, made for those marks. It sprays from the ground on an extension pole, so there is no ladder, no scaffold and no need to close the area while it is done.

ProCoat Acoustical Tile Restorer being sprayed onto a ceiling from the floor on an extension pole
Applied from the floor on an extension pole. No ladder, no staging, no closing the area.

What it covers

Water stains, soot spots, fingerprints and dirt smudges on tiles that are otherwise sound.

Two colors

One matched to ProCoustic, one for standard white tile, because ceiling tile is rarely the white people assume it is.

Keeps the tile in the grid

The tile stays where it is, keeps the acoustic rating it was specified with, and stays out of landfills.

Aftercare range

What goes to the facilities team

ProCoat Acoustical Tile Restorer aerosol cans in White and Ultra White

ProCoat Acoustical Tile Restorer (ATR)™

An aerosol that is primer and top coat in one, for water stains, fingerprints, soot and smudges on tiles that are otherwise sound. Quick-drying, with a zero-sheen finish, no surface preparation needed, and the acoustic and fire retardant properties of the tile are maintained. Sprays vertically or horizontally. Two colors: one matched to ProCoustic, one for standard white tile.

ProCoat Easy Reach Spray Adapter fitted to an extension pole

Easy Reach Spray Adapter™

Fits the aerosol to an extension pole so a stain is touched up from the floor. No ladder, no staging and no standing under the spray. It adjusts to most angles and puts the can about sixteen feet up.

ProCoat Soft Sweep Broom head with vinyl bristles fitted to an extension pole

ProCoat Soft Sweep Broom™

Vinyl bristles that hold dust and dirt rather than scattering it the way a traditional broom does. Used from the floor on the same pole, on the tile, the grid and the air diffusers and vents where dust gathers first. Washable and hard to wear out.

Aftercare material keeps the coating looking right once the crew has gone. Preparation material is a separate list and is used before the coating goes on.

How it is supplied

Maintenance kits

MK1

One can of Acoustical Tile Restorer, one Soft Sweep Broom head, one Easy Reach Spray Adapter and a ten foot extension pole.

MK6

Six cans of Acoustical Tile Restorer, with the same broom head, spray adapter and ten foot pole.

MK12

Twelve cans of Acoustical Tile Restorer, with the same broom head, spray adapter and ten foot pole.

The Acoustical Tile Restorer is also sold on its own, twelve cans to a case. Ask for the current information sheet.

Find out what your ceiling needs

We can do a site survey to tell you whether the ProCoat solution is right for you. If replacement is truly the best solution, we will tell you that as well.

Let’s Talk