ProCoat solution

ProCoustic

Resurfaces aged acoustical ceiling tile and suspension grid. About half the cost and less disruption than replacement. Non-bridging, sustainable, recoatable, Class A flame spread rating retained, acoustics retained.

Substrates

Mineral fiber and fiberglass acoustical tile, suspension grid, air diffusers

Coverage

Up to 1,500 sq ft per 5 gallon

Colors

Standard white or custom tint

Application

Airless spray, in place, overnight. Tiles remain free to lift out of the grid.

  • Water-based
  • Low odor
  • Non-bridging
  • Recoatable
  • Flame spread 25 to 0
  • Standard white or custom tint
The commercial case

Half the cost, and the doors open in the morning

Restoring an acoustical ceiling with ProCoustic generally runs about half the cost of tearing the tile out and painting the grid. The saving is not only the tile itself. It is the demolition, the dumpster, the disposal fees, the new tile on order, and the days the space cannot earn anything.

The time difference is the one customers feel first. Replacement takes a space out of use for days at a time, area by area, and there is no way to hand back half a ceiling. ProCoustic goes on after the building closes. A crew works through the night and the doors open the next morning.

The second difference is how long you get before the ceiling is a decision again. A replaced ceiling is back on the capital schedule in six to eight years. ProCoustic carries a fifteen-year color retention warranty when ProCoat installs it, and at the end of that the same tile can be coated again, so the next cycle starts without a demolition either.

~50%Of the cost of tearing the tile out and painting the gridProCoat life cycle model
15 yearsColor retention warranty, when ProCoat installs itWarranty document
OvernightClosed after business, open the next morningTypical return to service

The modeled comparison, covering a 20,000 square foot ceiling over fifteen years, is on the home page. The costs that never reach the quote are set out on Why restore.

Sustainability

The tile stays in the building

750 millionSquare feet of ceiling tile kept in service and out of landfills since 1983ProCoat
Water-basedLow odor and no solvent, sprayed with the fixtures and the stock still in the roomTechnical data sheet
RecoatableThe same tile can be coated again and again, without being replacedSpecification

A tear-out sends the old ceiling to a landfill and calls for new tile to be manufactured, shipped and carried in to replace something that was already there. Restoration keeps the existing assembly where it is. Over the life of a building that is the difference between replacing the same ceiling every six to eight years and keeping one ceiling in service.

The technical difference

Why the ceiling stays a ceiling

An acoustical tile works because it is porous. Thousands of perforations and open fibers absorb sound instead of reflecting it. The tile also has to lift out of its grid, so that the void above stays reachable. And because it is the largest surface in the room, it is doing most of the work of spreading light around that room.

Ordinary paint destroys all three. Just as it leaves a film that sticks a window to its sill, it forms a film across the ceiling: it flows into the gap between the tile edge and the t-bar and dries there, gluing the two together, and it fills the perforations and turns an absorbent surface into a hard one. The room gets louder, the tile tears when anyone tries to lift it, and the Class A flame spread rating the ceiling was specified to meet no longer applies.

ProCoustic is formulated not to bridge that gap and not to fill the perforations. The ceiling stays a ceiling. That single property is the difference between restoration and damage.

PAINT, BRIDGEDsealed acrossthe jointTile cannot lift. Perforations filled. Rating void.PROCOUSTIC, NON-BRIDGINGgap stays open,tile still liftsTile lifts. Absorption improves. Class A flame spread rating retained.
Cross section at the tile and grid joint. Diagram, not to scale.

Full report available on request

What the independent tests found

Testing done in standard white ProCoustic.

12.75%More light reflected than a brand new tileASTM E1331, Avian Technologies
9%Improvement in noise reduction coefficient, 0.55 to 0.60ASTM C423, NGC Testing Services
Class AFlame spread reduced from 25 to 0ASTM E84, NGC Testing Services
50%Less smoke developed after ProCoustic applicationASTM E84, NGC Testing Services

Construction Specifications Institute section 09590

Specification

Substrates Mineral fiber and fiberglass acoustical tile, exposed t-bar grid, air diffusers, Tectum, plaster
Coverage Up to 1,500 square feet per 5-gallon pail, single coat
Color Standard white, plus custom tint to order
Application Airless spray, in place. Tile, grid, speaker plates and air diffusers all at the same time
Base Water-based, low odor, no solvent
Return to service Typically the same night, open the next morning
Recoat Yes, the tile can be recoated again and again

Fire performance, volatile organic compound content, dry times and coverage under specific site conditions are on the current technical data sheet, and the testing was carried out on standard white ProCoustic. Confirm every figure against that sheet before writing a specification, because the numbers are revised as the formulation is revised.

Turnkey, or product only

Turnkey

ProCoat surveys the ceiling, writes the specification and manages the project, and ProCoat’s own crews do the work as ProCoat Contract Services. This is the route that carries the fifteen-year color retention warranty.

Product only

Buy the material direct from ProCoat or through a distributor, including Sherwin-Williams, and apply it with your own crew. Technical support is included, and the material carries a one-year product warranty.

Documents

Back of house, stockroom ceiling

ProCoustic in place

Air diffuser and surrounding acoustical tile before coating, yellowed with soiling around the cone
BeforeDiffuser and tile, soiled in service
The same air diffuser after coating, white and uniform with the tile and grid around it
AfterDiffuser coated with the tile, in one pass

The grid and the air diffusers are coated at the same time as the tile. That is what stops a restored ceiling looking like new tiles dropped into an old frame.

Where it goes

Applied in place, overnight

Tile, grid and diffusers

Ceiling tile, the exposed t-bar grid and the air diffusers, coated as one surface so the ceiling has a uniform finish.

Airless spray, tiles in place

Nothing is torn out and there is no new tile to order, store or match to a pattern that is no longer made. Tiles that are not whole, dry and flat are replaced before coating.

Out of hours

A crew works after close and the space is open for business the next morning. Water-based and low odor, so there is nothing to ventilate first.

Restorable again later

A restored ceiling can be restored again. The second time costs about what the first time cost.

When it is not the answer

Where the tile is not a sound candidate for a coating, we will tell you that at the survey. Broken or warped tiles get replaced rather than coated.

Companion products

Vinyl-faced and food preparation ceilings would use the ProVinyl system. Fiber-reinforced plastic walls would be resurfaced with ProWall. Difficult substrates that paint scrapes off of can use ProBond.

Evidence

A concourse that could not close

Transit station concourse with a gray, patchy acoustical ceiling before coating
BeforeConcourse ceiling, gray and patchy
The same concourse after ProCoustic, ceiling bright and uniform with the station open
AfterSame ceiling, station never shut

Coated overnight in a building that runs a service the next morning. No tile was taken out of the grid.

How did you replace all those ceiling tiles in less than a week?

Store management, Weis Markets40,000 square feet, coated in the grid rather than torn out.

Find out what your ceiling needs

We can do a site survey to tell you whether the ProCoat solution is right for you. If replacement is truly the best solution, we will tell you that as well.

Let’s Talk