ProCoat solution

ProCoat Acoustic Tile Cleaner

Prepares acoustical tile before ProCoustic is applied, so contaminants do not bleed back through the coating.

Substrates

Acoustical ceiling tile

Coverage

Dilution dependent

Colors

Application

Used to prepare the tile before ProCoustic is sprayed, so contaminants do not bleed back through the coating.

  • Cleaner
  • Preparation
  • Acoustical tile
  • Dilution dependent
Before anything gets coated

Cleaning is the preparation, not the alternative

A coating applied over a contaminated tile fails at the contaminant. Nicotine, grease, cooking vapor and soot come back through a coating sprayed over them, so the tile is cleaned first and the coating follows. The surface has to be sound as well as clean before the coating goes on.

There are two ProCoat cleaners because the contaminant decides which one is needed. This is the one for acoustical tile.

It is rarely needed. Most ceilings are prepared without it. Where nicotine, heavy grease or soot has built up in the tile, this is the stage that stops the contaminant bleeding back through the coating.

Acoustical ceiling tile and suspension grid in close detail, lightly soiled
Tile and grid. Cleaning prepares the tile so the coating bonds and contaminants do not bleed back through.
Product data

Specification

Substrates Mineral fiber and fiberglass acoustical ceiling tile
Dilution Dilution dependent, per the technical data sheet
Used at Preparation before coating
Applied by Facilities teams and applicators

Dilution rates, contact times and handling are on the current technical and safety data sheets. Ask for the current sheets before writing a work plan.

Find out what your ceiling needs

We can do a site survey to tell you whether the ProCoat solution is right for you. If replacement is truly the best solution, we will tell you that as well.

Let’s Talk