Cleaning is the preparation, not the alternative
A coating applied over a contaminated tile fails at the contaminant. Nicotine, grease, cooking vapor and soot come back through a coating sprayed over them, so the tile is cleaned first and the coating follows. The surface has to be sound as well as clean before the coating goes on.
There are two ProCoat cleaners because the contaminant decides which one is needed. This is the one for acoustical tile.
It is rarely needed. Most ceilings are prepared without it. Where nicotine, heavy grease or soot has built up in the tile, this is the stage that stops the contaminant bleeding back through the coating.

Specification
| Substrates | Mineral fiber and fiberglass acoustical ceiling tile |
|---|---|
| Dilution | Dilution dependent, per the technical data sheet |
| Used at | Preparation before coating |
| Applied by | Facilities teams and applicators |
Dilution rates, contact times and handling are on the current technical and safety data sheets. Ask for the current sheets before writing a work plan.