The grid is half of what people are looking at
A ceiling is not only tile. The suspension grid, the air diffusers, the light lenses and the hard finishes around them make up a large part of what anyone standing in the room sees, and they soil differently from the tile.
That is why a ceiling with new tile dropped into an old grid still looks wrong. It is also why ProCoat coats grid and diffusers with the tile rather than leaving them.
ProCoat Hard Surface Cleaner is the preparation step for those surfaces, used before any coating goes on.
Preparation is not cosmetic. A contaminant left on a grid or a diffuser bleeds back through the coating that goes over it, which is why the surface is treated first rather than coated over. Grease, nicotine and soot each behave differently, and the two ProCoat cleaners exist to cover that.
Like the tile cleaner, it is rarely a standalone purchase. It is the first stage of the system.

Specification
| Substrates | Suspension grid, air diffusers, light lenses, hard wall finishes |
|---|---|
| Dilution | Dilution dependent, per the technical data sheet |
| Used at | Surface preparation before coating |
Dilution rates, contact times and handling are on the current technical and safety data sheets. Ask for the current sheets before writing a work plan.
How it is used
Before the coating
Grid and diffusers are cleaned so the coating bonds to a sound surface rather than to what has settled on it.
Before the coating
Used as the preparation stage so the coating bonds to the surface rather than to what has settled on it.
On the hard finishes
The transitions, bulkheads and wall surfaces that sit inside the same sightline as the ceiling.